Manually Setting Scales On A Rectangular Display Format - Agilent Technologies E5071C Manual

Reference line
value
(Reference
Value)

Manually setting scales on a rectangular display format

1. Press
Channel Next/Channel Prev
to select the trace for which scale features will be adjusted.
2. Press
Scale
3. Select the softkey that corresponds to the particular feature that
needs to be adjusted.
Softkey
Divisions
Scale/Div
Reference
Position
Reference Value
Defines the value corresponding to the reference line. It must be
set using the unit on the Y-axis. The reference line value applies
only to the active trace.
key.
Function
Defines the number of divisions on the Y-axis.
Defines the number of increments per division on the Y-
axis.
Defines the position of the reference line.
Defines the value corresponding to the reference line.
keys and
Trace Next/Trace prev
Measurement
keys
103