The Ripple Limit Table Is Saved In The Following Format; Turning On/Off Ripple Test And Result Display - Agilent Technologies E5071C Manual

E5071C
3. Specify any folder in which you want to save the file, and enter the
file name. Click Save to save the ripple limit table displayed on the
screen to a file.
4. To recall the saved ripple limit table, click Import from CSV File from
the Edit RippleLimit menu to display the Open dialog box. At this
time, CSV Files (with the extension *.csv) is selected as the file type.
5. Specify the folder that contains the file, and then select the file. Click
Open to recall the saved limit table on the screen.
6. You can recall a limit table from a trace on any channel
independently of the channel and trace that were active when
the limit table was saved to the file.

The ripple limit table is saved in the following format:

In the first line, the channel number for the active channel at the
•
time of file saving will be output.
In the second line, the trace number for the active trace at the time
•
of file saving will be output.
The third line is a header indicating the segment items that are
•
output from the fourth line onward.
From the fourth line onward, the segment data are output.
•
Operational procedure
"# Channel 1"
"# Trace 1"
Type, Begin Stimulus, End Stimulus, MaxRipple
ON, 933.0000000 MHz, 964.0000000 MHz, 1.5 dB
ON, 938.0000000 MHz, 953.0000000 MHz, 500 mdB
ON, 953.0000000 MHz, 960.0000000 MHz, 300 mdB

Turning ON/OFF Ripple Test and Result Display

You can set the limit test ON/OFF for each trace individually.
1. Press
Channel Next/Channel Prev
to select the trace on which you want to apply the ripple test
function.
2. Press
Analysis
3. Click Ripple Limit to display the softkeys for to the ripple test.
4. Click the following corresponding softkeys.
Softkey
Ripple
324
key to display the Analysis menu.
Function
Sets the ripple test ON/OFF.
keys and
Trace Next/Trace prev
keys