Agilent Technologies E5071C Manual page 38

5-1. Channel Title Bar
You can assign a title to each channel and have the title displayed on the
bar. For more on setting up a channel title bar, see Labeling a window.
5-2. Trace Name/Measurement Parameter
The names of the traces (Tr1 through Tr9)on the channel and their
measurement parameters are displayed here.
name indicates the active trace (the trace for which setup is being
performed). To make a trace active, use
Clicking the line where the trace name is placed (the mouse pointer
changes from
5-3. Data Format
The data format of each trace is displayed here. For more on setting up
data formats, see Selecting a Data Format.
5-4. Scale Settings
The scale setting for each trace is displayed here. This example shows that
"10.00dB/" corresponds to 10 dB per division. "Ref 0.000dB" shows that
the value of the reference line is 0 dB. For more on setting scales, see
Setting the Scales.
to ) also makes a trace active.
to the right of the trace
Key or
Trace Next
Quick Start
Key.
Trace Prev
37