Agilent Technologies E5071C Manual page 874

a command) represented with High(0)/Low(1) of each bit of the port can
be output.
To output data, use the following command:
Port Name
Port A
Port B
Port C
Port D
Port E
Port F
The bit 6 of the data output by
•
data output by :CONT:HAND:F) is ignored when outputting the
/INDEX signal is turned on.
The bit 7 of the data output by
•
data output by
outputting the /READY FOR TRIGGER signal is turned on.
Sample Program
See Handler Interface.
Command
:CONT:HAND:A
:CONT:HAND:B
:CONT:HAND:C
:CONT:HAND:D
:CONT:HAND:E
:CONT:HAND:F
:CONT:HAND:F
(the bit 14 of the
:CONT:HAND:B
(the bit 15 of the
:CONT:HAND:B
command) is ignored when
Programming
1101