Options of (9 kHz to 3 GHz) and (100 kHz to 3 GHz) are
•
discontinued and is being replaced by option of (9 kHz to 4.5
GHz) and (100 kHz to 4.5 GHz). Upgrade kit is available.
Contact your nearest Agilent Technologies sales office for more
details.
14/20 GHz options (2D5, 4D5, 2K5 and 4K5) are available to
•
use in -85 dBm to +10 dBm power range. The maximum power
level is frequency range dependent.
Mechanical attenuation is used only in 14/20 GHz options. Due
to this, attenuation selection points/timing is different from
4.5/6.5/8.5 GHz options. For more information on attenuation,
refer to Setting Power Level with Auto Power Range
For more information, see the
•
http://www.agilent.com/find/ena_upgrades.
Software Options
Option
Number
008
010
790
TDR
The upgrade (retrofit) kits are available for the software options. See the
Configuration Guide
the upgrade kits. For activating the option, refer to Activating Software
Option.
Hardware Options
Option
Number
019
017
Timebase Options
Description
Frequency Offset Mode
Time Domain Analysis
Measurement Wizard Assistant Software
Enhanced Time Domain Analysis
and
http://www.agilent.com/find/ena_upgrades
Description
Standard (non-removable) HDD
Removable HDD
Product Information
Configuration Guide
and
for
751