E5071C
3. Click the softkey that corresponds to the desired trigger scope:
Trigger Scope
All Channel
Active Channel
3. Selecting a Trigger Mode
Follow the procedure below to select a trigger mode.
1. Press
Channel Next/Channel Prev
the trigger mode will be set.
2. Press
Trigger
3. Press the softkey that corresponds to the desired trigger mode.
Repeat the procedure until each channel is set for its trigger mode.
Softkey
Hold
Single
Continuous
Hold All
Channels
Continuous
Disp
Channels
4. Generating the Trigger
Next, it is necessary to generate a trigger by using the trigger source
selected in Selecting a Trigger Source.
Once the internal trigger source is selected, a series of triggers
•
is continuously generated as soon as the setting becomes
effective.
Pressing
•
abort the sweep.
268
Function
Triggers ALL channels
Triggers Active channel alone.
key.
Function
Sets active channel trigger mode to hold sweep
mode
Sets active channel trigger mode to single sweep
mode
Sets active channel trigger mode to continuous
sweep mode
Sets all channel trigger modes to hold sweep
mode
Sets trigger modes of all displayed channels
(Display
> Allocate Channels) to continuous sweep
mode
> Restart during a sweep forces the analyzer to
Trigger
keys to select the channel for which