Table of Contents
Advertisement
11 Click Next to install to the specified folder or click Change to install to a
12 Click Install to begin the installation of the Measurement Manager.
13 Click Finish when the installation has completed.
14 A shortcut to this software will be created to your desktop.
N O T E
E. Connect the module to your PC
N O T E
1 After all the installations have completed, connect the power cord to
2 Insert the DC output plug from the AC/DC power adapter to the power
3 Connect the U2722A/U2723A to any USB port on your PC with the
4 Your PC will automatically detect the connected unit and the Found New
U2722A/U2723A User's Guide
different folder.
USING THE LICENSED MATERIALS INDICATES YOUR ACCEPTANCE OF
THE LICENSE TERMS. IF YOU DO NOT AGREE TO ALL OF THESE TERMS,
using
YOU MAY RETURN ANY UNOPENED LICENSED MATERIAL FOR A FULL
REFUND, IF THE LICENSED MATERIALS ARE BUNDLED OR PRE-LOADED
WITH ANOTHER PRODUCT, YOU MAY RETURN THE ENTIRE UNUSED
PRODUCT FOR A FULL REFUND.
Ensure that the Agilent Measurement Manager is installed before
proceeding.
the AC/DC power adapter. The AC/DC power adapter requirements are
100 to 240 VAC, 50/60 Hz, with an output voltage of +12 VDC.
jack on the rear panel of the U2722A/U2723A.
bundled USB cable.
Hardware Wizard window will appear. Select Yes, this time only and click
Next to proceed.
Getting Started
1
17
Advertisement
Table of Contents
