Removing/Mounting Removable Hard Disk (Option 017 User Only); Backing Up/Retributing Option Data; Removing Removable Hard Disk (Type I) - Agilent Technologies E5071C Manual

E5071C

Removing/Mounting Removable Hard Disk (Option 017 User Only)

Overview
•
Backing_Up_Retributing_Option_Data
•

Removing Removable Hard Disk (Type I)

•
Mounting Removable Hard Disk (Type I)
•
Removing Removable Hard Disk (Type II)
•
Mounting Removable Hard Disk (Type II)
•
Writing System Correction Data from Backup Memory to Removable
•
Hard Disk
Other topics about Maintenance
Overview
This section provides information on how to mount and remove a
removable hard disk as well as write the system correction data.
For calibration or repair of the E5071C, send it with the removable hard
disk mounted.
If you replace the removable hard disk, make sure to retrieve the system
correction data and option data after mounting the hard disk

Backing Up/Retributing Option Data

1. Back up the license key file for software option before removing hard
disk.
2. Place the license key file after mounting the hard disk.
Removing Removable Hard Disk (Type I)
Follow the steps below to remove a removable hard disk.
1. Turn off the power.
2. Insert the key (furnished, Agilent Part Number 0960-2562) in the
lock and turn clockwise.
3. Press the button under the lock and remove the hard disk. It may be
too rigid to remove by fingers. In that case, use some tool such as a
840