To Connect The E5901B Emulation Module To The E5900B Emulation Probe - Agilent Technologies E5900B User Manual

1 Connect one end of the module/probe interconnect cable to the
2 Connect other end of the module/probe interconnect cable to the
3 Power on the emulation probe.
See Also
To connect the E5901B emulation module to the
E5900B emulation probe
E5901B emulation module in the logic analysis system mainframe.
"Emulation Module" connector on the E5900B emulation probe.
The LED next to the switch is lit when the switch is turned on and the probe is
being supplied with power.
Power is supplied by the 16700-series logic analysis system through the
module/probe interconnect cable. The external power supply is not necessary
for normal operation.
Chapter 2, "Connecting the Emulation Probe to a LAN," beginning on page 25.
(You need to connect the emulation probe to the LAN, even when you are
using an emulation module.)
Chapter 6, "Connecting the Emulation Probe to Your Target System,"
beginning on page 57.
Emulation for the Motorola M•CORE
Installing the Emulation Module
45