Agilent Technologies E5071C Manual page 617

E5071C
5. Remove the hard disk.
6. Do not attempt to unlock the key and remove the hard disk
when the power is on. Doing so will turn off the power
automatically.
Mounting Removable Hard Disk (Type II)
Follow the steps below to mount a removable hard disk.
1. Insert the hard disk into the slot.
2. Turn the screw in anti-clockwise direction until it is locked.
3. Turn the key to the right until it is locked.
4. Remove the key.
5. Turn on the E5071C.
6. The key is available to remove even in Unlocked state. Before
power on, confirm if Removable hard disk is locked completely.
Writing System Correction Data from Backup Memory to Removable Hard
Disk
The following procedure shows how to write the system correction data
stored in the backup memory to the newly mounted removable hard disk.
844