Agilent Technologies E5071C Manual page 542

unleveled
120 Printer error
121 Print failed
-284
Program
currently
running
-112 Program
mnemonic too
long
-286 Program
runtime error
Q
No. Message
-430 Query
DEADLOCKED
range.
For example, if the level after correction
exceeds the power level that can be
outputted when correcting the power
level with the power calibration and
power slope feature, this error occurs.
Check that the power level is set
correctly, the power calibration has been
performed correctly and the correction
value of the power slope is set correctly.
This error occurs when the previous
printing is still in progress or the printer
fails (offline, short of paper, etc.) at time
of outputting the display image on the
LCD screen to the printer (HCOP:IMM
command).
This error occurs when printing fails for
reasons other than Error 120, Printer
error.
This error occurs when the
PROG:SEL:STAT RUN command is
executed with the VBA program in the
Run state.
The length of the header exceeds 12
characters (see 7.6.1.4.1, IEEE488.2).
An error occurring when VBA is executed.
Description
The state that generates a
"DEADLOCKED" Query error (see
6.3.1.7, IEEE488.2). This error occurs
when both input and output buffers
have become full, preventing the
instrument from continuing processing,
for example.
Product Information
769