E5071C
Evaluating Transmission Characteristics of a Front End Module
Overview
•
Procedure
•
Other Measurement Examples
Overview
This example shows how to measure the transmission characteristics of a
6-port front end module, as shown in the following figure, by using the
E5071C and the E5091A.
Procedure
In this example, a DUT is evaluated according to the procedure shown in
table below.
Procedure
1. Determining Measurement
Conditions
2. Setting Channel Window Allocation
3. Setting the Test Ports
438
Description
Determine the measurement
conditions such as the sweep
conditions and measurement ports.
Set the allocation of the channel
windows on the screen.
Determine the test port assignment
for each channel.