Agilent Technologies E5071C Manual page 925

E5071C
13 Trace 13 Ripple Test Fail
14 Trace 14 Ripple Test Fail
15 Not used
Issuing the command will clear all the bits in the questionable ripple
*CLS
limit channel {1-16} status event register.
1152
measurement cycle finishes
and returns "fail" as the
ripple test result for trace 12.
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
ripple test result for trace 13.
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
ripple test result for trace 14.
Always 0