Agilent Technologies E5071C Configuration Manual
  1. Manuals
  2. Brands
  3. Agilent Technologies Manuals
  4. Measuring Instruments
  5. E5071C
  6. Configuration manual
Agilent Technologies E5071C Configuration Manual

Agilent Technologies E5071C Configuration Manual

Network analyzer configurable multiport test set
Hide thumbs Also See for E5071C:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Manual
This confi guration guide describes standard confi gurations, options, accessories and
peripherals for the E5071C ENA network analyzer. Refer to the ENA brochure for a complete
description of the ENA network analyzer and the E5092A confi gurable multiport test set.
Agilent
E5071C Network Analyzer
• 9 kHz to 4.5 GHz
• 100 kHz to 4.5 GHz (with bias tees)
• 9 kHz to 8.5 GHz
• 100 kHz to 8.5 GHz (with bias tees)
• 300 kHz to 20 GHz (with bias tees)
E5092A Configurable Multiport Test Set
Configuration Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E5071C and is the answer not in the manual?

Questions and answers

Related Manuals for Agilent Technologies E5071C

Summary of Contents for Agilent Technologies E5071C

  • Page 1 This confi guration guide describes standard confi gurations, options, accessories and peripherals for the E5071C ENA network analyzer. Refer to the ENA brochure for a complete description of the ENA network analyzer and the E5092A confi gurable multiport test set.

  • Page 2: Additional Product Information

    E5071C-019 Standard hard disk drive 1. Order the 82357B USB/GPIB interface at the same time if you want to control power meters with the E5071C. This will allow you to conduct scalar mixer calibrations (SMC), power calibrations, or receiver calibrations after power calibrations.
  • Page 3 1. Options are ordered using the combined model/option number, e.g. E5071C-240. 2. Order the 82357B USB/GPIB interface at the same time if you want to control power meters with the E5071C. This will allow you to conduct scalar mixer calibrations (SMC), power calibrations, or receiver calibrations after power calibrations.

  • Page 4: Block Diagram

    3A 3B 3C 3D 4A 4B 4C 4D 6A 6B 8A 8B 7A 7B 9A 9B 10A 10B SW10 5COM 6COM 7COM 8COM 9COM 10COM 1. Semi-rigid cables are designed for connection to the E5071C and are not available for the E5070B, E5071B.
  • Page 5 E5071C Option 440/445/480/485 adapters for connection to the E5071C. (4.5 GHz/8.5 GHz) Option 20C Cable and adapter set for the E5071C Adds SMA semi-rigid cables and 3.5 mm-to-3.5 mm Option 4K5 (20 GHz) adapters for connection to the E5071C. Accessories...

  • Page 6: Additional Software Options

    ENA Network Analyzer (E5071C) Hard disk drive options Additional software options Option 019 Standard hard disk drive Option 010 Time domain Option 019 provides a fi xed hard disk drive. The removable Option 010 enables the ENA to view refl ection and trans- disk drive is not available.

  • Page 7: Measurement Accessories

    Measurement Accessories A complete list of RF and microwave test accessories Waveguide measurements is available on our Web site: For waveguide measurements, Agilent offers mechanical www.agilent.com/fi nd/accessories calibration kits that include: • waveguide-to-coax adapters (X, P, K, R, Q, U, and V bands) Accessories are available with the following connector •...
  • Page 8 For devices with 50 ohm Type-N connectors Mechanical calibration kits Electronic calibration kits □ □ 85032F economy: DC to 9 GHz. Includes: 85092C RF ECal: 300 kHz to 9 GHz, 2 ports 85032-60017 Type-N (m) fi xed load Includes: 85032-60018 Type-N (f) fi xed load Option 85092C-MOF module with: 85032-60013 Type-N (m) open 85092-60008 Type-N (f) to Type-N (m) RF ECal module...
  • Page 9 □ N4432A Microwave ECal: 300 kHz to 18 GHz, 4 ports Cables □ Includes: N6314A 50 ohm Type-N RF cable, DC to 12.4 GHz Option 020 module with: includes 8120-8862 one 610 mm (24 in) cable with male N4432-60003 4 x Type-N (f) ECal module connectors □...
  • Page 10 For devices with 3.5 mm or SMA connectors Mechanical calibration kits Electronic calibration kits □ □ 85033E economy: DC to 9 GHz. Includes: 85093C RF ECal: 300 kHz to 9 GHz, 2 ports 85033-60016 3.5 mm (m) load Standard module includes: 85033-60017 3.5 mm (f) load Option M0F with: 85033-60018 3.5 mm (m) open...
  • Page 11 2. 1250-1744 3.5 mm (f) to 50 ohm Type-N (m) adapters are recommended to connect to the E5071C Option x4x, and x8x test ports, which have Type-N (f) connectors. 3. NMD-3.5 mm (f) to 3.5 mm (f), or 3.5 mm (f) to 3.5 mm (f) adapters are recommended to connect to the E5071C Option xK5, which have NMD-3.5 mm (m) connectors.

  • Page 12: For Devices With Waveguide

    For devices with 75 ohm Type-N connectors For devices with waveguide Mechanical calibration kits Mechanical calibration kits □ 85036B DC to 3 GHz, includes: X Band 00909-60019 75 ohm Type-N (m) broadband load □ X11644A standard, WR-90: 8.2 to 12.4 GHz. 00909-60020 75 ohm Type-N (f) broadband load Includes: 85036-60012 75 ohm Type-N (m) short...

  • Page 13: Additional Accessories

    P9404C SP4T solid state PIN diode switch, □ 82357B GPIB to USB interface, necessary to control a 100 MHz to 18 GHz power meter or signal generator with the E5071C. □ U9397C SPDT solid state FET hybrid switch, Monitors 300 kHz to 18 GHz □...

  • Page 14: Upgrade Kits

    Measurement port upgrade b) Add Time-domain analysis option: Order the E5004A with E5004A-1FP Time domain E5071CU-300 Port up from 2 ports to 4 ports for E5071C-240 analysis for E5071C. E5071CU-301 Port up from 2 ports to 4 ports for E5071C-245...
  • Page 15 E5071C Hardware upgrade options matrix From Upgrade options to order E5071CU-100 E5071CU-280 E5071CU-100 + E5071CU-285 E5071CU-300 E5071CU-100 + E5071CU-301 E5071CU-300 + E5071CU-480 E5071CU-100 + E5071CU-301+ E5071CU-485 E5071CU-280 + E5071CU-2K5 E5071CU-300 + E5071CU-480 + E5071CU-4K5 E5071CU-200 E5071CU-200 + E5071CU-280 E5071CU-285 E5071CU-200 + E5071CU-300...
  • Page 16 7 Reasons to Migrate from Your 8753 to an ENA Network Analyzer Application Note 1478 Literature number 5989-0206EN Multiport Solutions for E5071C ENA RF Network Analyzers Using External Switches Literature number 5989-7916EN Advanced Measurement Techniques for RF Amplifi ers Us-...
  • Page 17 0800 80 53 53 United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/fi nd/contactus Microsoft is a U.S. registered trademark of Microsoft Corporation. Revised: October 1, 2008 © Agilent Technologies, Inc. 2008 Printed in USA, October 8, 2008 5989-5480EN...

This manual is also suitable for:

E5092a

Table of Contents