Executing Calibration - Agilent Technologies E5071C Manual

2. Set measurement parameter for channels 2, 3, and 4 according to
the same setting of channel 1.

8. Executing Calibration

1. Display the Ecal menu.
Setting Description
Display the ECal menu.
2. Set channel 1 to the active channel.
Setting Description
Switch the active channel.
3. Check the test ports assigned to ports 1 to 4 in the E5091A
properties and connect the 4-port ECal module to those port.
4. Execute the calibration.
Key Operation
> ECal
Cal
Key Operation
Channel Next
Measurement
443