Agilent Technologies E5071C Manual page 628

B 7mm
N4431
3.5 mm
A*
N4431
3.5 mm
B*
N4431
Type-N
A*
N4431
Type-N
B*
combination are not warranted specification:
_______________________________________________________
__________________________________________
E5071C 3GHz, 4.5GHz, 6.5GHz, 8.5GHz (Option
230/235/240/245/260/265/280/285/430/435/440/445/460/465/
480/485)
Calibration Kit: 85032F, 85033E Electronic calibration (ECal)
module: 85092C, 85093C
____________________________________________________
____________________________________________________
______
E5071C 14GHz, 20GHz (Option 2D5/2K5/4D5/4K5)
Calibration Kit: 85052D
C-D, A-D, and B-C.
Cable Substitution
The test port cables specified for the E5071C have been characterized for
connector repeatability, magnitude and phase stability with flexing, return
loss, insertion loss, and aging rate. Since test port cable performance is a
significant contributor to the system performance, cables of lower
performance will increase the uncertainty of your measurement. It is highly
recommended that the test port cables be regularly tested.
If the system verification is performed with a non-Agilent cable, ensure
that the cable meets or exceeds the operation of the specified cable.
Cable Flex Factor
ECal**
ECal**
ECal**
ECal**
The results from the verification kit other than following
* The connection of the N4431x is for the thru path A-B,
** The supported connector type is "male-female".
Product Information
85053B 300 kHz
85053B 9 kHz
85055A 300 kHz
85055A 9 kHz
9 GHz
13.5
GHz
9 GHz
13.5
GHz
855