Carrying Out Measurement And Viewing Results; Connect The Dut - Agilent Technologies 4294A Operating Manual

Carrying Out Measurement and Viewing Results

Connect the DUT

Step 1. Increase the distance between the HIGH and LOW electrodes of the Agilent 16047E by
turning their fastening screws counterclockwise.
Step 2. Fit the DUT's lead wires between the HIGH and LOW electrodes.
Step 3. Turn the fastening screws of the HIGH and LOW electrodes to secure the DUT's lead
wires.
Figure 2-4 Connecting the DUT
Chapter 2
Learning Operation Basics
Carrying Out Measurement and Viewing Results
37