External Trigger Output Port; Bias Input Ports - Agilent Technologies E5071C Manual

E5071C
Through this port, you can control the E5071C from external controllers.
For more information on the measurement system using the USB port, see
the USB Remote Control System.
Specification
Connector type
Compliance
Standards

20. External Trigger Output Port

The External Trigger Output Port can output the pulse with the specified
polarity either before or after the measurement of each point.
The External Trigger Output Port can safely handle a maximum
•
Output Current of 50mA.
Symbol Parameter
Pulse Width
VOH HIGH Level Output Voltage
VOL LOW Level Output Voltage

21. Bias Input Ports

This BNC female connector allows external bias to be applied at the test
ports.
Do not apply DC voltage exceeding 35 Volt.
•
Bias Input Port is an optional component of E5071C. Valid for
•
options: 235, 435, 285, 485.
34
Value
Universal serial bus (USB) jack, type B (4 contact positions),
Female
USBTMC-USB488 and USB2.0
Typical Value
1
5
0
Unit Condition
µsec
Volt I =-50µA
out
Volt I =50µA
out