Saving A Newly Created Segment Table In Csv Format; Calling A Segment Table Saved In Csv Format - Agilent Technologies E5071C Manual

E5071C
Freq Base
Order
Base

Saving a newly created segment table in CSV format

As discussed in Creating a segment table, you can export the newly
created segment table as a CSV (comma-separated value) formatted file
(so it can be used easily in software that requires a different format).
1. Press
Sweep Setup
2. Click Edit Segment Table > Export to CSV File to open the Save As
dialog box. Note that CSV Files (*.csv) will already be selected as the
file type when the dialog box first opens.
3. Type the file name in the File Name area and Click Save to save the
segment table.

Calling a segment table saved in CSV Format

By importing a segment table file saved by E5071C, you can set up the
segment table.
It is possible to recall a file from a different channel where it
•
was saved.
1. Press
Sweep Setup
2. Click Edit Segment Table > Import from CSV File to open the Open
dialog box. Note that CSV Files (*.csv) will already be selected as the
file type when the dialog box first opens.
3. Select the CSV format file to be imported, and click Open to call up
the segment table.
You cannot import a CSV-formatted file created/edited in
•
spreadsheet software into the E5071C.
You cannot import CSV-formatted files created in firmware
•
revision A.09.60 or later to firmware revisions before revision
A.09.60.
392
Displays the X-axis as the axis for linear frequencies
(frequency-based display)
Displays the X-axis as the axis for the points (order-based
display)
Key.
Key.