Agilent Technologies E5071C Manual page 414

Setup Description
Activating Trace 5
Marker 1: ON
Search/Tracking: ON
Moving Marker 1 to the peak
in the pass band
The return loss (response value of Marker 1) in this example is 13.80
dB.
6. Turn on the marker table display.
Setup Description
Marker table display: ON
Activating Marker Table
10. Define the Setup for a Limit Table
Follow the steps below to make entries in the limit table.
Key Operation
Trace Next
Marker
Marker Search
ON)
Peak > Search Left|Search Right (
press as many times as necessary)
Key Operation
> Marker Table (Turn it ON)
Marker Fctn
Measurement
> Tracking (Turn it
413