Agilent Technologies E5071C Manual page 429

E5071C
3. Set the measurement parameter (mixed mode S-parameter) and
data format for trace 2.
Setting Description
Unbalanced-balanced conversion
of trace 2: ON
Measurement parameter: Scs21
4. Set the measurement parameter (mixed mode S-parameter) and
data format for trace 3.
Setting Description
Unbalanced-balanced
conversion of trace 3: ON
Measurement parameter:
Sss11
428
Key Operation
>
Trace next Analysis
Simulator > BalUn (turns it ON)
> Scs21
Meas
Key Operation
>
Trace next Analysis
Simulator > BalUn (turns it ON)
> Sss11
Meas
> Fixture
> Fixture