Agilent Technologies E5071C Manual page 871

E5071C
32 /WRITE
STROBE
33 /PASS FAIL
34 /SWEEP
END
35 +5V
36 /PASS FAIL
STROBE
Other topics about Communication with External Devices
1098
Output
Output
Output
Output
Output
configured to input port.
A output port write strobe
signal. When data is
present (that is, output
level changes) on any of
the output ports, this
signal provides a negative
pulse.
Each limit test's results
signal. This signal changes
to the High level when limit
test, bandwidth test, or
ripple test results return
FAIL. It changes to the Low
level when all limit test
results return PASS.
A sweep completion signal.
When measurement (all
sweeps of all channels) and
data calculation are
completed, this signal
provides a negative pulse.
Provides +5V DC power
supply for external
instruments.
Each limit test's results
write a strobe signal. When
limit test result is present
on /PASS FAIL, this signal
provides a negative pulse.