I/O Signal Pin Layout And Description - Agilent Technologies E5071C Manual

E5071C

I/O Signal Pin Layout and Description

The layout of the I/O signal pins on the handler interface connector and its
description are shown below.
A slash (/) symbol preceding signal names means that they are negative
logic (active low).
Pin Signal
number name
1 GND
2 /INPUT1
3 /OUTPUT1
1094
Input/Output
N/A
Input
Output
Description
Ground.
When this port receives a
negative pulse, /OUTPUT1
and /OUTPUT2 are
changed to the Low level.
Changes to the Low level
when /INPUT1 receives a