Setting Display Magnification; Resetting The Display Colors To The Factory State - Agilent Technologies E5071C Manual

E5071C
Graticule Sub
Limit Fail
Limit Line
Background
4. Click Red (or, Green, or Blue).
5. Select the amount of the selected color from 0 to 5.

Resetting the display colors to the factory state

You can reset the display colors in normal display and inverted display to
the preset factory state.
The selection procedure is as follows:
1. Press
System
2. Click Normal (for normal display) or Invert (for inverted display).
3. Click Reset Color > OK.

Setting Display Magnification

You can reset the display magnification to Small, Normal or Large.
The selection procedure is as follows:
1. Press
System
2. Click Normal, Small or Large.
110
Specifies the grid of graphs
Specifies the fail display in the limit test result
Specifies the limit line
Specifies the background
> Misc Setup > Display Setup > Color Setup.
> Misc Setup > Display Setup > Magnification.