Protecting Ena System - Agilent Technologies E5071C Manual

E5071C

Protecting ENA System

To protect your ENA, follow the instructions below:
1. Read the warning labels and specifications
Do not exceed the values provided in the specifications guide or as
indicated by the yellow warning labels on the front panel of ENA. Refer
to the specifications for the conditions required to meet the listed
specifications. There will be information regarding ENA settings, and
calibration requirements.
2. Do NOT Plug off Power Cable during Shutdown Process
Do Not Plug off Power cable until completely completing the shutdown
process.
If you directly interrupt the power supply to the power cable receptacle
when the power supply is on, or turn off the Line Switch (Always ON),
the shutdown process will not work. This could damage the HDD of the
E5071C.
3. Do NOT Modify or Reconfigure the Operating System
The Microsoft Windows operating system has been modified and
optimized by Agilent to improve the performance of the ENA.
Do NOT install a standard version of the Windows operating system
•
on the ENA.
Do NOT change advanced performance settings or group policies.
•
Do NOT add or delete any hard disk drive partitions on the ENA.
•
Do NOT delete the Agilent user account.
•
Do NOT modify any of the Agilent software registry entries.
•
Do NOT change the settings of Standards and Formats in Regional
•
Options and Languages from default setting (English).
4. Install Antivirus Protection
The ENA does NOT have antivirus protection when shipped. Use of an
antivirus program is strongly recommended if you connect the ENA to
the LAN (Internet).
In addition, the use of a firewall could help to protect the ENA from
viruses. However, some firewalls could limit DCOM connectivity of the
ENA.
5. Install Windows Critical Updates
16