Agilent Technologies E5071C Manual page 556

-101
Invalid
character
-141 Invalid
character
data
-121
Invalid
character in
number
-171
Invalid
expression
602 Invalid mask
data
-103
Invalid
separator
-151 Invalid string
data
-131 Invalid suffix
M
No. Message
-109 Missing
registration of DLC results
(:SENS:CORR:COLL:DLC:SAVE) is not
performed correctly.
An invalid character exists in the program
message character string.
An invalid character is found in the
character data element, or the parameter
received is not valid.
A character that is invalid for the data type
subject to syntactic analysis has been
received. For example, a letter is found in a
decimal numeric value or a numeric
character "9" in octal data.
The expression-data element is invalid (see
7.7.7.2, IEEE488.2). Parentheses are not
paired, or illegal characters are used, for
example.
An invalid mask data is loaded.
The parser (a syntactic analysis program)
had been expecting a delimiter, but a
character that is not a delimiter has been
sent.
Character string data has been expected,
but the character string data that appears is
invalid for some reason (see 7.7.5.2,
IEEE488.2). The END message is received
before the ending quotation mark character
appears, for example.
The suffix does not comply with the syntax
defined in 7.7.3.2, IEEE488.2. Or it does not
suit E5071C.
Description
The number of parameters is less than that
Product Information
783