Agilent Technologies E5071C Manual page 554

- Data type
104 error
E
No. Message
- Execution
200 error
- Exponent
123 too large
- Expression
178 data not
allowed
- Expression
170 error
F
No. Message
100 Failed to
read file
101
Failed to
write file
rounded exceeds the range of -65536 to +65536
or when a real-number-based command for which
the parameter can be rounded exceeds the range
of -9.9e37 to +9.9e37, for example.
The parser has recognized a data element that
must not exist. Block data has been sent instead
of numeric value data or character string data
that had been expected, for example.
Description
An error associated with execution has been
generated for which this instrument cannot
specify the error message. This code shows that
an error associated with execution defined in
11.5.1.1.5, IEEE488.2 has occurred. This error
occurs also when a calibration measurement is
aborted.
The absolute value of the exponent exceeds
32,000 (see 7.7.2.4.1, IEEE488.2).
An expression-data element has been received at
a position where this instrument does not accept
one.
When the expression data is put to syntactic
analysis, an error not corresponding to one of
Error Numbers -171 through -179 occurs.
Description
This error occurs when load eye-mask file
(:MMEM:LOAD:EYE:MASK) and load user defined
bit pattern file (:MMEM:LOAD:EYE:BPAT) cannot
be read correctly.
This error also occurs when formatted data
(:MMEMy:STOR:FDAT), displayed image
(:MMEM:STOR:IMAG) and measurement data
(:MMEM:STOR:SNP) cannot be stored correctly.
Product Information
781