Agilent Technologies E5071C Manual page 705

E5071C
sweep
Sweep time
IF bandwidth
932
list tables 3 and one for
channels 2 and
4, two in total
Number of Up to 30
segments
per table
Creation Creating a
of a table table using
using more than one
GPIB(SCPI command
)
command
Number of 1 to 1601
points points per
segment.
Up to 1601
points in total.
Stepped/s stepped mode
wept and swept
mode mode.
Selectable only
when list
frequency
sweep is
performed
Sweep of Allowed
designate
d
segments.
Automatic,
Manual
(definable from
the shortest
time to 24
hours)
10 Hz, 30 Hz,
100 Hz, 300
Hz,
1 KHz, 3 kHz,
total)
Up to 201
Creating a table
using a single
command
2 to 200001
points per
segment.
Up to 20001
points in total.
stepped mode
and swept
mode.
Selectable also
when list
frequency
sweep is not
performed.
Not allowed
(Always sweeps
all segments.)
Automatic,
Manual (range
of definable
sweep depends
on sweep
condition)
10 Hz, 15 Hz,
20 Hz, 30 Hz,
40 Hz, 50 Hz,
70 Hz, 100 Hz,