Agilent Technologies E5071C Manual page 848

Analyzing impedance
By turning on the parameter conversion function, you can convert the
measurement result of the S parameter to the following parameters.
Equivalent impedance in reflection measurement

Equivalent impedance in transmission measurement

Equivalent admittance in reflection measurement

Equivalent admittance in transmission measurement

Inverse of S-parameter (1/S)

To turn On/Off the parameter conversion function, use the following
command:
:CALC{1-36}:CONV
To select the parameter to which you want to convert the measurement
result, use the following command:
:CALC{1-36}:CONV:FUNC
Other topics about Analyzing Data
Programming
1075