Agilent Technologies E5071C Manual page 870

Hide thumbs Also See for E5071C:

Table of Contents

Input/Output

to the High level when the

trigger signal for the first

point is received. When

measurement of all

measurement points is

completed and the

instrument is ready to

receive the trigger signal

for the first point of the

next sweep, this signal

goes to the Low level

Bit 0 of port C (4 bit

parallel I/O port)

Bit 1 of port C.

Bit 2 of port C.

Bit 3 of port C.

Bit 0 of port D (4 bit

parallel I/O port)

Bit 1 of port D.

Bit 2 of port D.

Bit 3 of port D.

Port C status signal.This

signal is changed to the

High level when the port C

is configured to output

port. It is changed to the

Low level when the port is

configured to input port.

Port D status signal. This

signal is changed to the

High level when the port D

is configured to output

port. It is changed to the

Low level when the port is

Show Quick Links

Table of Contents