Extending The Calibration Plane Using Network De-Embedding; Using Network De-Embedding Function - Agilent Technologies E5071C Manual

Extending the Calibration Plane Using Network De-embedding

Overview
•

Using Network De-embedding Function

•
Other topics about Fixture Simulator
Overview
Network de-embedding is a function for performing measurements, test
port by test port, by removing the characteristics of an arbitrary network
defined by a Touchstone data file. By removing the characteristics of the
cable, test fixtures, etc. between the actual calibration plane and the DUT,
the calibration plane can be correspondingly extended. The network de-
embedding function can be used together with the port extension function.
Port extension and calibration plane extension using network de-
embedding
Using Network De-embedding Function
1. Prepare a two-port Touchstone data file (.s2p format) corresponding
to the network to be removed.
normalized impedance value (real). Thus, when preparing a
Touchstone data file with the 2-port network de-embedding
feature, be sure to specify the same port reference impedance
value (real) to both 2-port network in the file.
2. Press
Analysis
3. Click Select Port.
A Touchstone data file is defined for a single
key, then click Fixture Simulator > De-Embedding.
Measurement
455