Agilent Technologies E5071C Manual page 878

The times of T1 and T2 are the same as those when the point trigger
function is off. For more information, see Timing chart of I/O Port
Signal(Point trigger function:off).
Timing Chart of Data Output and Write Strobe Signal
T1 Response time of write strobe signal
T2 Pulse width of write strobe signal
Timing Chart of Limit Test Result Output and Write Strobe Signal
T1 Response time of /PASS FAIL write strobe
T2 Pulse width of /PASS FAIL write strobe
Programming
1 µs
1 µs
1 µs
1 µs
1105