Functions For Balanced Port (4 Ports Option Only); Differential/Common Port Impedance Conversion (4 Ports Option Only); Differential Matching Circuit Embedding (4 Ports Option Only) - Agilent Technologies E5071C Manual

Hide thumbs Also See for E5071C:

Table of Contents

A function that uses software to convert the measurement results in an

unbalanced DUT state, which are obtained by connecting the DUT to the

test port of the E5071C, into measurement results in a balanced state. Two

test ports of the E5071C are connected to one balanced port of the DUT.

For the setup procedure used for balance-unbalance conversion, see

Evaluating Balanced Devices (balance-unbalance conversion function).

Functions for balanced port (4 ports option only)

The following two functions are applied to a balanced (differential) port

converted by balance-unbalance conversion.

A function for converting the differential mode port impedance of a

balanced port after an balance-unbalance conversion. Balance-unbalance

conversion automatically converts the differential mode port impedance at

the balanced port into 2Z0 and the common mode port impedance into

Z0/2, compared with the two pre-conversion port impedances of Z0.

Differential port impedance conversion further converts a differential port

impedance after balance-unbalance conversion into an arbitrary port

For the setup procedure used for differential port impedance conversion,

see Converting Reference Impedance of Balanced Port.

A function for converting the measurement results obtained from balance-

unbalance conversion into a characteristic under the condition of inserting

a matching circuit in the balanced port.

For setup procedure of differential matching circuit embedding, see

Determining the Characteristics that Result from Adding a Matching Circuit

to a Differential Port.

Show Quick Links

Table of Contents