Instr State Block - Agilent Technologies E5071C Manual

(numeric
keys)
+/-
& Key
+/-
entry area.
+/-
area. When a numerical character is entered in the entry area, the
+/-
Adds a prefix to the numeric data typed by using the numeric key and
G/n, M/u,
k/m, x1
+/-
Keys
the surface of the key is automatically selected depending on the
parameter to be entered.
Turns off the data entry bar if it is displayed. If the dialog box is
Softkey
displayed, cancels the entry and closes the dialog box. If the data
On/Off ,
entry bar and dialog box are not displayed, turns the softkey menu
Entry Off
Key
display on/off.
Key
Displays online help for E5071C.
Help
Key
Changes the selection (focus) among the objects to be manipulated
Focus
by the
be manipulated by the
include softkey menus, data entry areas, tables (e.g., segment
tables, limit tables, and marker tables), and dialog boxes. When two
or more of these are displayed on the screen and need selecting, use
this key to change the selection (focus) among the objects to be
manipulated. When a softkey menu is selected, the menu name area
at the top of the menu is displayed in blue. When a data entry area is
selected, the data entry bar is displayed in blue. When a table is
selected, the frame of the table window is displayed in light gray.
While a dialog box is displayed, the focus is fixed on the dialog box
and cannot be changed.

9. INSTR STATE Block

A group of keys related to the macro function, store and call function,
control/management function, and the presetting of the E5071C (returning
it to the preset state).
Key Name
Macro Setup
Key
Key
Macro Run
Macro Break
alternately changes the sign (+, - ) of a numeric value in the data
is the backspace key.
key works only when there are no numerical values in the entry
key transforms into (
key and then enters that data. One of the two prefixes written on
Block keys and
NAVIGATION
NAVIGATION
Description
Displays the Macro Setup Menu on the right side of the screen.
Manipulating the Macro Setup Menu enables you to start up the
VBA editor or to create, call, or store a VBA project.
Executes a VBA procedure called "main" that has a VBA module
named Module1.
Stops the VBA procedure being executed.
) backspace key.
is entered without a prefix.
x1
Block keys. The objects to
ENTRY
Block keys and
Quick Start
Block keys
ENTRY
27