Vector Mixer Characterization Macro - Agilent Technologies E5071C Manual

5. The following dialog appears. Click OK.
When more than 1601 measurement points is set for 1 channel and
4 traces, the E5071C VBA macro function may take more time to
operate.

Vector Mixer Characterization Macro

3. Selecting Measurement Port
Select the 1-port calibration port (1 in menu).
Select any port if full 2-port calibration is set.
•
4. Setting IF Frequency
Select IF frequency from RF+LO, RF-LO and LO-RF (2 in menu), depending
on the IF frequency of the calibration mixer.
The number displayed in the Vector Mixer Characterization
•
macro is the frequency set in the E5071C and read from it. You
Measurement
249