Searching For Positions Matching Specified Criteria - Agilent Technologies E5071C Manual

Searching for Positions Matching Specified Criteria

Overview
•
Using Marker Search
•
Analysis Commands
•
Sample Program
•
Other topics about Analyzing Data
Overview
You can search for a position that matches specified criteria by using the
Marker Search feature or analysis commands.
Using Marker Search
Marker Search is available whether the markers are shown or
•
hidden.
Setting the Search Range
You can use either the entire sweep range or a user-defined range for the
marker search range by using the following command:
:CALC{1-36}:MARK:FUNC:DOM
When you opt to use a user-defined range, use the following commands to
set the range:
Description
Start value (lower limit value)
Stop value (upper limit value)
You can also select whether to specify the marker search range
independently for each trace by using the following command.
:CALC{1-36}:MARK:FUNC:DOM:COUP
Selecting a Search Type
Marker Search allows you to choose from the following eight search types:
Maximum value

Minimum value

Peak (3 types)

Maximum peak (for a positive peak), minimum peak (for a
•
negative peak)
Command
:CALC{1-36}:MARK:FUNC:DOM :STAR
:CALC{1-36}:MARK:FUNC:DOM :STOP
Programming
1057