Agilent Technologies E5071C Manual page 778

:SYST:BACK
Setting Display Color
Selecting Display Mode
You can select the one of two LCD display modes: normal display (black
background) or inverted display (white background).
To select the display mode, use the following command:
:DISP:IMAG
Setting display color for each item
To set the display colors, use the following commands:
Data trace
Memory trace
Graph
Limit test
Background
Resetting display colors to factory state
You can reset the display colors in normal display and inverted display to
the preset factory state.
To reset the display colors, use the following command:
:DISP:COL{1-2}:RES
:DISP:COL{1-2}:TRAC{1-36}:DATA
:DISP:COL{1-2}:TRAC{1-36}:MEM
:DISP:COL{1-2}:GRAT{1-2}
:DISP:COL{1-2}:LIM{1-2}
:DISP:COL{1-2}:BACK
Programming
1005