Agilent Technologies E5071C Manual page 892

Hide thumbs Also See for E5071C:

Table of Contents

1. Set to "1" when the E5071C receives a

data output request but there is no data to

2. Set to "1" when the data of the

E5071C's output queue has been cleared

because of a new message received before

the completion of data output.

Set to "1" when an error has occurred and

the error is not a command, query, or

execution error.

1. Set to "1" when any parameter in an

SCPI command exceeds its input range or

is inconsistent with the E5071C's

capabilities.

2. Set to "1" when an SCPI command

cannot be properly executed due to some

condition of the E5071C.

1. Set to "1" when an IEEE 488.2 syntax

error occurs (a command sent to the

E5071C does not follow the IEEE 488.2

syntax). Possible violations include the

command parameter violating the E5071C

listening formats or being unacceptable.

2. Set to "1" when a semantic error

occurs. Possible causes include a

command containing misspellings being

sent to the E5071C or an IEEE 488.2

command not supported by the E5071C

3. Set to "1" when GET (Group Execution

Trigger) is input while a program message

is being received.

Show Quick Links

Table of Contents