Tdr Error Message - Agilent Technologies E5071C Manual

E5071C

TDR Error Message

TDR Error Messages
An error message is displayed on a dialog box. In E5071C-TDR application
on PC (remote control), the error message is displayed at the Error
Message area of the application.
An error with a positive error number is one uniquely defined for this
instrument. On the other hand, an error with a negative error number is
basically one defined for common GPIB devices in IEEE488.2
A B C D E F G H I
B
No. Message
- Block
168 data not
allowed
C
No. Message
- Character
148 data not
allowed
- Command
100 error
D
No. Message
- Data out
222 of range
780
J K L M N O P Q R
Description
An block-data element has been received at a
position where this instrument does not accept
one.
Description
A character data element (not violating the
standard) has been received at a position where
this instrument does not accept one. Double
quotes (") are omitted where it is necessary to
place a parameter in double quotes ("), for
example.
A comprehensive syntax error has occurred
showing that this instrument cannot detect a more
detailed error. This code simply shows that a
command error defined in 11.5.1.1.4, IEEE488.2
has occurred.
Description
A data element (not violating the standard)
outside the range defined by this instrument has
been received. This error occurs when an integer-
based command for which the parameter can be
S T U V W X Y Z