Table of Contents
Advertisement
7. Connecting the DUT to the Test Fixture
How to connect the DUT to the 16192A is shown in below as an example. The procedures for
the 16191A and 16193A are shown in Appendix C.
1. Push the lever and place the DUT on the electrode. 2. Release the lever to hold the DUT.
Caution
that provides a high resistance path to ground. Alternatively, ground yourself
to discharge any static charge built-up by touching the outer shell of any
grounded instrument chassis before touching the test port connectors.
Protect the instrument from ESD damage by wearing a grounding strap
Basic Measurement Procedures
3-19
Advertisement
Table of Contents
