Turning On Sweep Averaging - Agilent Technologies E5071C Manual

E5071C
To specify the IF bandwidth, follow the steps described below.
1. Press
Channel Next/Channel Prev
specify the IF bandwidth.
2. Press
Avg
3. Click IF Bandwidth, then Change the IF bandwidth in the data entry
area.

Turning on Sweep Averaging

Using sweep averaging also enables you to reduce the effects of random
noise on measurements.
Sweep averaging averages data from each point (vector quantity) based
on the exponential average of a continuous sweep weighted by the
averaging factor specified by the user. Sweep averaging is expressed in
following equation.
where:
366
key.
keys to select a channel on which to