Converting S-Parameters To H, Y, Z, F & T-Parameters - Agilent Technologies E5071C Manual

complex c, complex d)
Z22(scalar i, scalar j)
1. For both mu1 and mu2, conj is the complex conjugate. For
scalars a and b, conj(a+ib)=(a-ib).
Channel Parameter Data
data
data(scalar i)
mem
mem(scalar i)
xAxis
xAxis(scalar i)
S11 - S44
When a trace number is out of range, the ENA indicates an error
•
message, "Equation runtime error" and equation is not reflected
on the trace. The maximum number of traces can be set by
System
Converting S-Parameters to H, Y, Z, F & T-Parameters
The following section provides definition of the two port parameters in
Equation Editor of the ENA.
1. Hybrid parameters (H)
2. Admittance parameters (Y)
a)*(1-d) - b*c)
returns Z22(Sii, Sji, Sij, Sjj)
corrected data
corrected data of trace i (trace number)
memory data
memory data of trace i (trace number)
x-axis data
x-axis data of trace i (trace number)
S-parameter data
> Misc Setup > Channel/Trace Setup.
Measurement
335