Agilent Technologies E5071C Manual page 557

E5071C
parameter
N
No. Message
-120 Numeric data
error
-128 Numeric data
not allowed
O
No. Message
-225 Out of memory
P
No. Message
-220 Parameter
error
-108 Parameter not
allowed
784
required for the command, or the
parameter has not been entered. For
example, the command
"SENS:AVER:COUN" requires one more
parameter.
Therefore, when a message
"SENS:AVER:COUN" is sent to a correct
program message "SENS:AVER:COUN 16"
this instrument receives the former
message as an invalid one because all
parameters have not been entered. Enter
command parameters correctly.
Description
An error resulting from the numeric value
data (including numeric value data having
no decimal point representation) has
occurred. A numeric value error other than
Errors -121 through -129 has occurred.
An numeric-value-data element (not
violating the standard) has been received
at a position where this instrument does
not accept one.
Description
Insufficient memory is available in this
instrument to perform the required
operation.
Description
When a parameter-related error other
than Errors -221 through -229 occurs,
that error is displayed.
The number of parameters exceeds that
required for the command.
For instance, when a program message