Setting Channels And Traces; Setting Upper Limit Of Number Of Channels/Traces - Agilent Technologies E5071C Manual

Hide thumbs Also See for E5071C:

Table of Contents

Setting Channels and Traces

Setting Channel Display (Layout of Channels)

Setting Trace Display

Active Channel

Setting Parameter for each Setup Item (Analyzer, Channel, Trace)

Other topics about Setting Measurement Conditions

The E5071C allows you to use up to 160 channels (when the number of

traces is up to 9) to perform measurement under 160 different stimulus

For each channel, up to 4, 6, 9, 12 or 16 traces (measurement

parameters) can be displayed. Because multiple traces can be displayed for

each channel, no feature is provided to link the stimulus conditions

between channels, and each channel is always independent of the others.

In other words, for the E5071C, you need to set the measurement

conditions and execute calibration for each channel you use for

measurement.

With the E5071C, you can change the number of available channels and

the upper limit of the number of traces. If you change the upper limit

setting, you need to restart the firmware of the E5071C. Therefore, first,

set the upper limit appropriately depending on the numbers of channels

and traces necessary for your measurement.

When you set items whose setting target is channels/traces (refer to

Parameter setting for each setup

channel/trace. You can specify only the displayed channels/traces as active

channels/traces. Therefore, set the display of channels/traces before

setting the measurement conditions.

Setting Upper Limit of Number of Channels/Traces

You can select the upper limits of the number of channels and the number

of traces from the following combinations.

item), the target is the selected (active)

Show Quick Links

Table of Contents