Performing Search Tracking; Searching For Maximum And Minimum Values; Searching For The Target Value (Target Search) - Agilent Technologies E5071C Manual

Performing Search Tracking

1. Press
Channel Next/Channel Prev
to activate the trace on which you want to set up search tracking.
2. Press
Marker Search
3. Click Tracking and turn the search tracking function ON/OFF.

Searching for Maximum and Minimum Values

You can search for the maximum or minimum measured value on the trace
and move a marker to that point.
Search for
maximum (Max)
Search for minimum
(Min)
Procedure
1. Activate the marker you are using to search for the maximum and
minimum values.
2. Press
Marker Search
3. Click the corresponding softkey to move the marker to the maximum
or minimum measured value.
When the data format is in Smith chart or polar format, execute
•
the search only for the main response value.

Searching for the target value (target search)

keys and
key.
Move active marker
measured value is greatest
Move active marker to point on trace where
measured value is lowest
key.
Measurement
Trace Next/Trace Prev
to point on trace where
keys
291