Agilent Technologies E5071C Manual page 476

Establishes port 1 on the DUT as balanced ports
Bal
4. Select each port on the analyzer to which a port on the DUT is
connected.
When you have selected SE-Bal:
•
Softkey Function
Selects a port on the analyzer from among 1, 2, 3,
Port 1
and 4 for connection to logical 1 (Port a)
(se)
Selects two ports on the analyzer from among 1-2, 1-
Port 2
3, 1-4, 2-1, 2-3, 2-4, 3-1, 3-2, 3-4, 4-1, 4-2, and 4-3 for
(bal)
connection to logical port 2 (Port b and Port c)
When you have selected Bal-Bal:
•
Softkey Function
Selects two ports on the analyzer from among 1-2, 1-
Port 1
3, 1-4, 2-1, 2-3, 2-4, 3-1, 3-2, 3-4, 4-1, 4-2, and 4-3 for
(bal)
connection to logical port 1 (Port a and Port b)
Selects two ports on the analyzer from among 1-2, 1-
Port 2
3, 1-4, 2-1, 2-3, 2-4, 3-1, 3-2, 3-4, 4-1, 4-2, and 4-3 for
(bal)
connection to logical port 2 (Port c and Port d)
When you have selected SE-SE-Bal:
•
Softkey Function
Selects a port on the analyzer from among 1, 2, 3, and
Port 1
4 for connection to logical 1 (Port a)
(se)
Selects a port on the analyzer from among 1, 2, 3, and
Port 2
4 for connection to logical 2 (Port b)
(se)
Selects two ports on the analyzer from among 1-2, 1-3,
Port 3
1-4, 2-1, 2-3, 2-4, 3-1, 3-2, 3-4, 4-1, 4-2, and 4-3 for
(bal)
connection to logical port 3 (Port c and Port d)
When you have selected Bal:
•
Softkey Function
Measurement
475