Saving And Recalling Instrument State - Agilent Technologies E5071C Manual

E5071C

Saving and Recalling Instrument State

Overview
•
Compatibility of Files (Saving and Recalling)
•
Saving Data
•
Recall Procedure
•
Recall Procedure Using "Recall by File Name"
•
Priority of Recalling Configuration File at Startup
•
Other topics about Data Output
Overview
You can save the instrument state of the E5071C into a file on mass
storage and then recall it later to reproduce that state. You can select the
stored data from the following four types.
Type Stored data and usage
State only Saves the setting of the E5071C and reproduces the state
(State when it was saved by recalling it later into the E5071C.
Only)
State and Saves the setting of the E5071C and calibration data
calibration (calibration coefficient array) to reproduce the state when
data it was saved by recalling it later into the E5071C. At this
(State & time, you can perform error correction of measured
Cal) values by using the recalled calibration data.
State and Saves the setting of the E5071C and traces (error-
trace corrected data array and error-corrected memory array)
(State & to reproduce the state when it was saved by recalling it
Trace) later into the E5071C. At this time, the traces are also
recalled and displayed on the screen.
State, Saves the setting of the E5071C, calibration data, and
calibration traces to reproduce the state when it was saved by
data, and recalling it later into the E5071C. At this time, the
traces calibration data and traces are also recalled.
(All)
In addition, the "user-preset" function is provided to allow the user to
freely set up an instrument state recalled when the preset function is
executed.
342