Agilent Technologies E5071C Manual page 99

E5071C
Expanded Phase (can be displayed
phase format
above +180 ° and
below -180 ° )
Positive phase Phase (displayed in range
format from 0 ° to +360 ° )
Group delay Signal transfer delays
format within the DUT
Linear Magnitude
magnitude
format
SWR format
(ρ: reflection coefficient)
Real format Real part of measured
complex parameter
Imaginary Imaginary part of
format measured complex
parameter
Polar format
In the polar format, traces are drawn by expressing the magnitude as a
displacement from the origin (linear) and phase in an angle
counterclockwise from the positive X-axis. This data format does not have
a stimulus axis, so frequencies must be read by using the marker. The
polar format allows users to select one of the following three data groups
for displaying the marker response values.
Linear magnitude and phase ( ° )
•
Log magnitude and phase ( ° )
•
98
Degrees ( ° ) Measurement of deviation from
linear phase
Degrees ( ° ) Measurement of deviation from
linear phase
Seconds (s) Group delay measurement
(Abstract Reflection coefficient
number) measurement
(Abstract Measurement of standing wave
number) ratio
(Abstract
number)
(Abstract
number)