Conditions For Setting Segment Sweep - Agilent Technologies E5071C Manual

E5071C
Frequency ranges (segments) from the figure above and their
measurement conditions
Start
frequen
cy
A 440 MHz
B 915 MHz
C 980 MHz
E 1.07 GHz
G 2.6 GHz

Conditions for Setting Segment Sweep

The following conditions apply when setting up a segment sweep.
The frequency range of a segment must not overlap with that of
•
another segment. (The start frequency of a segment must be higher
than the stop frequency of the immediately preceding segment).
384
Stop Numb
frequen er of
cy points
915 MHz 50
980 MHz 130
1.035 60
GHz
2 GHz 100
3 GHz 40
IF Swee
Bandwidt p
h mode
50 kHz Steppe
d
70 kHz Steppe
d
50 kHz Steppe
d
70 kHz Swept
70 kHz Swept
Stat
e
ON
ON
ON
ON
ON