Agilent Technologies E5071C Manual page 536

-141
Invalid
character
data
-121 Invalid
character in
number
500 Invalid
equation
expression
501
Invalid
equation label
-171 Invalid
expression
602 Invalid mask
data
-103 Invalid
separator
-151 Invalid string
data
-131 Invalid suffix
L
No. Message
53 Log sweep
An invalid character is found in the
character data element, or the parameter
received is not valid.
A character that is invalid for the data type
subject to syntactic analysis has been
received. For example, a letter is found in a
decimal numeric value or a numeric
character "9" in octal data.
The equation expression used in Equation
Editor is not valid.
The equation label used in Equation Editor is
not valid.
The expression-data element is invalid (see
7.7.7.2, IEEE488.2). Parentheses are not
paired, or illegal characters are used, for
example.
This error occurs when invalid mask data is
loaded.
The parser (a syntactic analysis program)
had been expecting a delimiter, but a
character that is not a delimiter has been
sent.
Character string data has been expected,
but the character string data that appears is
invalid for some reason (see 7.7.5.2,
IEEE488.2). The END message is received
before the ending quotation mark character
appears, for example.
The suffix does not comply with the syntax
defined in 7.7.3.2, IEEE488.2. Or it does not
suit E5071C.
Description
The span of sweep range is not satisfied the
Product Information
763